document number: 94386 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 06-jun-08 1 phase control scr, 20 a 30tps...pbf high voltage series vishay high power products description/features the 30tps...pbf high voltage series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. the glass passivation technology used has reliable operation up to 125 c junction temperature. typical applications are in input rectification (soft start) and these products are designed to be used with vishay hpp input diodes, switches and ou tput rectifiers which are available in identical package outlines. this product has been designed and qualified for industrial level and lead (pb)-free (?pbf? suffix). product summary v t at 20 a < 1.3 v i tsm 300 a v rrm 800/1200 v (g) 3 2 (a) 1 (k) to-247ac a v aila b le p b -free rohs* compliant major ratings and characteristics parameter test conditions values units i t(av) sinusoidal waveform 20 a i rms 30 v rrm /v drm 800/1200 v i tsm 300 a v t 20 a, t j = 25 c 1.3 v dv/dt 500 v/s di/dt 150 a/s t j - 40 to 125 c voltage ratings part number v rrm /v drm , maximum repetitive peak and off-state voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm /i drm at 125 c ma 30TPS08PBF 800 900 10 30tps12pbf 1200 1300 * pb containing terminations are not rohs compliant, exemptions may apply
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 94386 2 revision: 06-jun-08 30tps...pbf high voltage series vishay high power products phase control scr, 20 a absolute maximum ratings parameter symbol test conditions values units maximum average on-state current i t(av) t c = 95 c, 180 conduction half sine wave 20 a maximum rms on-state current i rms 30 maximum peak, one-cycle non-repetitive surge current i tsm 10 ms sine pulse, rated v rrm applied 250 10 ms sine pulse, no voltage reapplied 300 maximum i 2 t for fusing i 2 t 10 ms sine pulse, rated v rrm applied 310 a 2 s 10 ms sine pulse, no voltage reapplied 442 maximum i 2 t for fusing i 2 t t = 0.1 to 10 ms, no voltage reapplied 4420 a 2 s maximum on-state voltage drop v tm 20 a, t j = 25 c 1.3 v on-state slope resistance r t t j = 125 c 12 m threshold voltage v t(to) 1.0 v maximum reverse and direct leakage current i rm /i dm t j = 25 c v r = rated v rrm /v drm 0.5 ma t j = 125 c 10 maximum holding current i h anode supply = 6 v, resistive load, initial i t = 1 a 100 maximum latching current i l anode supply = 6 v, resistive load 200 maximum rate of rise of off-state voltage dv/dt 500 v/s maximum rate of rise of turned-on current di/dt 150 a/s triggering parameter symbol test conditions values units maximum peak gate power p gm 8.0 w maximum average gate power p g(av) 2.0 maximum peak positive gate current + i gm 1.5 a maximum peak negative gate voltage - v gm 10 v maximum required dc gate current to trigger i gt anode supply = 6 v, resistive load, t j = - 10 c 60 ma anode supply = 6 v, resistive load, t j = 25 c 45 anode supply = 6 v, resistive load, t j = 125 c 20 maximum required dc gate voltage to trigger v gt anode supply = 6 v, resistive load, t j = - 10 c 2.5 v anode supply = 6 v, resistive load, t j = 25 c 2.0 anode supply = 6 v, resistive load, t j = 125 c 1.0 maximum dc gate voltage not to trigger v gd t j = 125 c, v drm = rated value 0.25 maximum dc gate current not to trigger i gd 2.0 ma switching parameter symbol test conditions values units typical turn-on time t gt t j = 25 c 0.9 s typical reverse recovery time t rr t j = 125 c 4 typical turn-off time t q 110
document number: 94386 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 06-jun-08 3 30tps...pbf high voltage series phase contro l scr, 20 a vishay high power products thermal and mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg - 40 to 125 c maximum thermal resistance, junction to case r thjc dc operation 0.8 c/w maximum thermal resistance, junction to ambient r thja 40 maximum thermal resistance, case to heatsink r thcs mounting surface, smooth and greased 0.2 approximate weight 6g 0.21 oz. mounting torque minimum 6 (5) kgf cm (lbf in) maximum 12 (10) marking device case styl e to-247ac (jedec) 30tps08 30tps12
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 94386 4 revision: 06-jun-08 30tps...pbf high voltage series vishay high power products phase control scr, 20 a fig. 1 - current rating characteristics fig. 2 - current rating characteristics fig. 3 - on-state power loss characteristics fig. 4 - on-state power loss characteristics fig. 5 - maximum non-repetitive surge current fig. 6 - maximum non-repetitive surge current 90 100 110 120 130 0 5 10 15 20 25 30 60 90 120 180 maximum allowable case temperature (c) conduction angle average on-state current (a) 3 0 tp s. . se r i e s r (dc) = 0.8 c/ w thjc 80 90 100 110 120 130 0 5 10 15 20 25 30 35 dc 30 60 90 120 180 average on-state current (a) maximum allowable case temperature (c) conduction period 3 0 tps. . se r i e s r (dc) = 0.8 c/ w thjc 0 10 20 30 40 50 60 0 5 10 15 20 25 30 rm s li m i t conduction angle maximum average on-state power loss (w) average on-state current (a) 180 120 90 60 30 30tps.. se rie s t = 125c j 0 20 40 60 80 0 1020304050 dc 180 120 90 60 30 rm s li m i t conduction period maximum average on-state power loss (w) average on-state current (a) 3 0 tp s. . se r i e s t = 1 2 5 c j 120 140 160 180 200 220 240 260 280 110100 number of equal amplitude half cycle current pulses (n) at any rated load condition and with rated v applied following surge. rrm peak half sine wave on-state current (a) init ia l t = 125c @ 60 hz 0.0083 s @ 50 hz 0.0100 s j 3 0 tp s. . se r i e s 120 140 160 180 200 220 240 260 280 300 0.01 0.1 1 peak ha lf sine wa ve on-st a te current (a) pulse train duration (s) versus pulse train duration. control of conduc tion may not be ma intained. initia l t = 125c no vo lt a g e re a p p lie d ra t e d v re a p p l i e d rrm j 30tps.. se rie s maximum non repetitive surge current
document number: 94386 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 06-jun-08 5 30tps...pbf high voltage series phase contro l scr, 20 a vishay high power products fig. 7 - on-state voltage drop characteristics fig. 8 - thermal impedance z thjc characteristics fig. 9 - gate characteristics 1 10 100 1000 01234567 t = 2 5 c j instantaneous on-state current (a) instantaneous on-state voltage (v) t = 125c j 30tps.. se rie s 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 square wave pulse duration (s) st e a d y st a t e v a l u e (dc operation) si n g l e p u l se d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.08 30tps.. series transient thermal impedance z (c/ w) thjc 0.1 1 10 100 0.001 0.01 0.1 1 10 100 (b) (a) (4) (3) (2) (1) instantaneous gate current (a) instantaneous gate voltage (v) tj = 2 5 c tj = 1 2 5 c frequency limited by pg(av) tj = - 1 0 c igd vgd 30tps.. serie s tr = 1 s, t p >= 6 s <= 30% rated di/dt: 10 v, 65 ohms b)recommended load line for rated di/dt: 10 v, 20 ohms tr = 0.5 s, tp >= 6 s a)recommended load line for re c t a n g u l a r g a t e p u l se (1) pgm = 40 w, tp = 1 ms (2) pgm = 20 w, tp = 2 ms (3) pgm = 8 w, tp = 5 ms (4) pgm = 4 w, t p = 10 ms
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 94386 6 revision: 06-jun-08 30tps...pbf high voltage series vishay high power products phase control scr, 20 a ordering information table 1 - current rating (30 = 30 a) 2 - circuit configuration: 3 - package: 4 t = thyristor - type of silicon: 5 - voltage code x 100 = v rrm p = to-247 s = standard recovery rectifier 6 - none = standard production pbf = lead (pb)-free 08 = 800 v 12 = 1200 v device code 5 13 24 6 30 t p s 12 pbf links to related documents dimensions http://www.vishay.com/doc?95223 part marking information http://www.vishay.com/doc?95226
outline dimensions www.vishay.com vishay semiconductors revision: 16-jun-11 1 document number: 95223 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters and inches notes (1) dimensioning and tolera ncing per asme y14.5m-1994 (2) contour of slot optional (3) dimension d and e do not include mold flas h. mold flash shall not exceed 0.127 mm (0 .005") per side. these dimensions are measu red at the outermost extremes of the plastic body (4) thermal pad contour optional with dimensions d1 and e1 (5) lead finish uncontrolled in l1 (6) ? p to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) outline conforms to jede c outline to-247 with ex ception of dimension c symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.65 5.31 0.183 0.209 d2 0.51 1.30 0.020 0.051 a1 2.21 2.59 0.087 0.102 e 15.29 15.87 0.602 0.625 3 a2 1.50 2.49 0.059 0.098 e1 13.72 - 0.540 - b 0.99 1.40 0.039 0.055 e 5.46 bsc 0.215 bsc b1 0.99 1.35 0.039 0.053 fk 2.54 0.010 b2 1.65 2.39 0.065 0.094 l 14.20 16.10 0.559 0.634 b3 1.65 2.37 0.065 0.094 l1 3.71 4.29 0.146 0.169 b4 2.59 3.43 0.102 0.135 n 7.62 bsc 0.3 b5 2.59 3.38 0.102 0.133 ? p 3.56 3.66 0.14 0.144 c 0.38 0.86 0.015 0.034 ? p1 - 6.98 - 0.275 c1 0.38 0.76 0.015 0.030 q 5.31 5.69 0.209 0.224 d 19.71 20.70 0.776 0.815 3 r 4.52 5.49 1.78 0.216 d1 13.08 - 0.515 - 4 s 5.51 bsc 0.217 bsc 0.10 a c m m e n (2) (3) (4) (4) (2) r/2 b 2 x r s d see view b 2 x e b4 3 x b 2 x b2 l c (5) l1 1 2 3 q d a a2 a a a1 c ? k b d m m a (6) ? p (datum b) fp1 d1 (4) 4 e1 0.01 b d m m view a - a thermal pad d2 dde e c c view b (b1, b3, b5) base metal c1 (b, b2, b4) section c - c, d - d, e - e (c) planting lead assignments diodes 1. - anode/open 2. - cathode 3. - anode
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
